全自动立式橡胶射出成型机
Vertical Type Full Automatic Rubber Injection Molding Machine
适用范围：200T-600T Scope of application :200T-600T
1.力学设计：机座采用特殊力学设计，平面精度佳，制成品外观美，品质佳。
2.入料系统：特殊二段式入料设计，能使原料得到0佳排气效果，又不死料之功能。
3.射出量控制：采用高精密度德制电子尺设计，能准确的控制与计算射出量之大小。
4.冷流道技术：配套模具提供水循环模温控制机，实现冷流道技术，有效防止死料的产生，减少橡胶原料的损耗。
5.模内真空设计：具有进口真空泵浦，可提供模具内抽真空功能，确保产品品质，提升成品良率。
6.00设计：具有日制高科技红外线00电眼，并具有全自动防护设置，可清楚掌握机台状况，确保00。
7.油路设计：采用全比例式油路系统，低噪音并具有自动调整压力大小比例之功能，精确稳定。
1.Mechanics design:The base adopts special mechanics design and the precision of the horizon is more accurate . The appearance of the machine is more beautiful as well as the high quality.
2.Material supply system:A special design of two-states material supply is employed . It expels bubble out of the raw material in the most effective way and there is no dead material left in the injection system.
3.Injection volume control:A design incorporating a high precision optical ruler made in Germany is employed . The injection volume can be calculated and controlled precisely.
4.Cold runner technology:Supporting mold is employed to provide water cycle to achieve cold runner technology ,it can avoid dead material effectively to save raw material.
5.Vacuum design of mold :Adopting imported vacuum pump to achieve vacuum supply , it can ensure the quality.
6.Security design :A light curtain made in Japan is available . And an automatic warning system is available . It monitors the status of machine in order to provide extra protection to assure the operation safety for operators .
7.Circuit board design :A full-scale oil system is adopted . The noise is low and the pressure is adjusted automatically and proportionally .It is very accurate and stable.
本系列机械特点 ● 锁模油缸先锁模,再由注胶油缸将胶料匀速压入模腔,制品飞边少,几何尺寸精确,物理机械性能均匀稳定. ● 采用原装进口高压油泵和中高压叶片泵组合,比例压力流量复合阀控制,油路配置先进合理可靠,噪声小,能耗低. ● 动模板快速上升,慢速锁紧,快速下降,提高生产效率,保护模具. ● 采用自动进退模及顶出机构,降低劳动强度,避免模具的人为破坏. ● 液压油缸应用了具有自主知识产权的“油缸复合密封装置”,密封可靠,寿命长. ● 油箱采用了“翻盖板结构开放式油箱”,维修维护省时省力,更加人性化. ● 电气系统采用全电脑控制,操作方便, 具有点动,半自动两种工作模式,用户可选用德国西门子或日本三菱进口PLC控制,5.7寸触摸屏显示 ● 准备坯料简单,快捷,生产效率高
网站地图 
联系我们
